Bad BIOS checksum. Starting BIOS recovery Floppy … This prevents incorrect insertion when you connect the IDE cable. Click an item to open the folder of the user manual. Place the support CD in the optical drive. The Drivers menu appears. See page for the Utilities screen menu. This utility helps you keep your computer in healthy operating condition. Page Chapter 5: Software Support This chapter describes the contents of the support CD that comes with the motherboard package.
Software support Page 98 Chapter summary 5. The CD automatically displays the Drivers menu if Autorun is enabled in your computer. Page Drivers Menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices.
Page Utilities Menu This utility helps you keep your computer in healthy operating condition. Page Visit the Microsoft website www. Click an item to open the folder of the user manual. Page Asus Contact Information 5. You can also find this information on the inside front cover of this user guide. Chapter 5: Software support Page Other Information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support CD. Click an icon to display the specified information.
Motherboard Info Displays the general specifications of the motherboard. Filelist Displays the contents of the support CD in text format. Page Software Information 5.
Page Ratio box. Page Audio Configurations Audio Manager icon on the taskbar. Page Configuration Options Information Click the information button to display information about the audio driver version, DirectX version, audio controller, audio codec, and language setting. Minimize Click the minimize button to minimize the window. Click the drop-down menu to select the channel configuration. The control settings window displays the status of connected devices.
Click for analog and digital options. Click the Noise Suppression option button to reduce the static background noise when recording. Click the Acoustic Echo Cancellation option button to reduce the echo from the front speakers when recording. If Autorun is not enabled in your computer, browse the contents of the support CD to locate the setup. Double-click the setup. Page Click to buttons. You can also adjust the threshold increase values using the Config window.
Page Monitoring sensor alert The monitor panel turns red when a component value exceeds or is lower than the threshold value. Refer to the illustrations below. Page The left panel of the tab lists all logical drives. Click a hard disk drive to display the information on the right panel. The pie chart at the bottom of the window represents the used blue and the available HDD space. Page Memory usage The Memory tab shows both used and available physical memory.
The pie chart at the bottom of the window represents the used blue and the available physical memory. Connect the SATA signal cables. Connect a SATA power cable to the power connector on each drive. The following screen appears, displaying the relevant information about the RAID set you created. A selected HDD shows a sign before it. You can now talk to your partners on the headphone while playing multi-channel network games. See page for details. AI Gear. AI Gear provides four modes that adjust the CPU frequency and Vcore voltage minimizing system noise and power consumption.
You can choose the mode that best suits your computing needs. AI Nap. With AI Nap, the system can continue running at minimum power and noise when you are temporarily away.
To wake the system and return to the OS environment, simply click the mouse or press a key. Moreover, Advanced Q-Fan has a better control over a constant temperature system environment. This feature can enhance speech-centric applications like Skype, online game, video conference and recording. This feature detects repetitive and stationary noises non-voice signals like computer fans, air conditioners, and other background noises then eliminates it in the incoming audio stream while recording.
ASUS Q-Connector allows you to easily connect or disconnect the chassis front panel cables to the motherboard. This unique module eliminates the trouble of connecting the system panel cables one at a time and avoiding wrong cable connections.
This feature allows you to convert your favorite photo into a color boot logo for a more colorful and vivid image on your screen.
The C. When the system hangs due to overclocking, C. Take note of the following precautions before you install motherboard components or change any motherboard settings.
The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component.
The illustration below shows the location of the onboard LED. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components.
When installing the motherboard, make sure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below. Place eight 8 screws into the holes indicated by circles to secure the motherboard to the chassis.
Refer to 1. Contact your retailer. ASUS will process Return. Locate the CPU socket on the motherboard. Before installing the CPU, make sure that the cam box is facing towards you and the load lever is on your left.
Press the load lever with your thumb A , then move it to the left B until it is released from the retention tab. B This side of the socket box should face you. Position the CPU over the socket, making sure that the gold triangle is on the bottom left corner of the socket then fit the socket alignment key into the CPU notch. The CPU fits in only one correct orientation. Refer to the Appendix for more information on these CPU features.
Make sure that you have installed the motherboard to the chassis before you install the CPU fan and heatsink assembly. Place the heatsink on top of the installed CPU, making sure that the four fasteners match the holes on the motherboard.
Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector.
Carefully remove the heatsink and fan assembly from the motherboard. Rotate each fastener clockwise to ensure correct orientation when reinstalling. The narrow end of the groove should point outward after resetting. The photo shows the groove shaded for emphasis. Refer to the documentation in the boxed or stand-alone CPU fan package for detailed information on CPU fan installation. Otherwise, system will halt. The system maps the total size of the lower-sized channel for the dual-channel configuration.
Any excess memory from the higher-sized channel is then mapped for single-channel operation. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor. If this happens, contact your memory vendor to check the ODT value. If you want to operate with lower latency, adjust the memory timing manually. Welcome to ManualMachine. We have sent a verification link to to complete your registration.
Log In Sign Up. Forgot password? The figure shows a graphics card installed on the PCI Express x16 slot. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard. The SATA slots and other headers are put at the bottom left, though the IDE connection is at the bottom which makes it somewhat tough to reach. Change User Password After you have set a supervisor password, the other items appear to allow you to change other security settings.
The system was tested with Windows Vista so, if you are interested, the Vista Experience score was 3. Instructions that you MUST follow to complete a task. It would be nice to see rounded IDE cables instead of old-school flat onesa few more SATA wires, and a quick installation guide, but the necessities are there. When set to [Enabled], the pallete snooping feature informs the PCI devices that an ISA graphics device is installed in the system so that the latter can function correctly.
As with any motherboard purchase there is a lot of consider before going with this one. The DIMM might get damaged when it flips out with extra force. You can also find this information on the inside front cover of this user guide. Boot Settings Configuration This allows you to enable or disable the full screen logo display feature. This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are as essential for the working of basic functionalities of the website.
0コメント